Mike Shaw Subaru

Subaru Forester ABS and Brake Light

Subaru Forester ABS and Brake Light service at Mike Shaw Subaru in Thornton, CO

Frequently asked questions
2025 Subaru Forester Sport shown

On a Subaru Forester, an amber ABS light means the anti-lock braking system has switched itself off, while a red brake light can signal an applied parking brake, low brake fluid, or a hydraulic fault. The two warnings require different levels of attention, and both lights together—or a red brake light with a soft pedal—mean the vehicle should not be driven. Mike Shaw Subaru in Thornton, CO, provides ABS and brake light service by scanning the anti-lock brake module and inspecting the related braking components. The visit helps identify whether the warning relates to a wheel-speed sensor, wiring, tone ring, fluid, pads, parking brake switch, or another named brake-system concern rather than relying on guesswork.

What the ABS and brake lights mean on a Subaru Forester

The amber ABS light may remain on after the vehicle starts when the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault. Normal braking remains, but the wheels can lock during a hard stop. The red BRAKE light—or a circle with an exclamation point—may stay illuminated after the parking brake is released when the parking brake is applied, brake fluid is low, or the hydraulic system has a fault.

A soft pedal, a pedal that travels farther than usual, or wheels that lock in a hard stop adds urgency. Low brake fluid usually points to worn pads or a leak. If both lights are on, or if the red light appears with a soft pedal, the vehicle should not be driven.

What the diagnosis covers at Mike Shaw Subaru

ABS and brake light service at Mike Shaw Subaru begins with a scan of the anti-lock brake module for stored trouble codes. The inspection includes testing the wheel-speed sensors, their wiring, and the tone rings that support the system’s wheel-speed readings.

The brake system inspection also checks brake fluid level and condition, pad wear, and the parking brake switch. This process helps trace the warning to a sensor, wiring concern, fluid condition, pad wear, parking brake switch, or hydraulic issue. Drivers can schedule service at Mike Shaw Subaru for a focused diagnosis.

Recalls on the Subaru Forester

NHTSA 14V830000 covers 2012–2013 Subaru Forester vehicles for brake line corrosion at the four-way joint connector area, which may allow brake fluid to leak and increase stopping distance; the remedy is anti-corrosion wax applied by a dealer at no charge.

NHTSA 14V311000 covers 2012–2013 Subaru Forester vehicles for brake line corrosion that may cause brake fluid leakage and longer stopping distances; the remedy includes a brake-pedal test and inspection for leaks at no charge. Mike Shaw Subaru checks open recalls by VIN and performs the remedy at no charge to the owner.

Booking at Mike Shaw Subaru

The visit includes an anti-lock module scan and inspection of the wheel-speed sensors, wiring, tone rings, brake fluid, pads, and parking brake switch. Drivers can schedule service online or contact Mike Shaw Subaru at (720) 724-9280.

Mike Shaw Subaru is located at 1650 W 104th Avenue, Thornton, CO 80234. A brake warning diagnosis can help determine whether the light is connected to a sensor, fluid, pads, or another inspected system component.

Frequently Asked Questions

5 common questions answered

What does the ABS light mean on a Subaru Forester?The amber ABS light means the anti-lock system has switched itself off, most often because of a wheel-speed sensor fault.

Normal braking remains, but the wheels can lock during a hard stop. An ABS module scan and inspection of the wheel-speed sensors, wiring, and tone rings can help trace the warning.

What is the difference between the amber ABS light and the red brake light?The amber ABS light concerns the anti-lock system, while the red brake light can indicate an applied parking brake, low fluid, or a hydraulic fault.

The red light may appear as BRAKE or as a circle with an exclamation point. Both lights together, or a red light with a soft pedal, mean the vehicle should not be driven.

Is it safe to drive with the ABS light on?With only the ABS light on, normal braking remains, but the wheels can lock in a hard stop.

A red brake light with a soft pedal, or both the ABS and red brake lights together, means the vehicle should not be driven. A brake inspection can identify the concern.

What usually causes the ABS and brake lights?The named causes include a wheel-speed sensor fault, low brake fluid, worn pads, a leak, an applied parking brake, or a hydraulic fault.

The diagnosis also checks the sensor wiring, tone rings, brake fluid condition, pad wear, and parking brake switch. The anti-lock brake module is scanned for stored trouble codes.

How do I book ABS and brake light service at Mike Shaw Subaru?Drivers can schedule service online with Mike Shaw Subaru in Thornton.

The visit includes an ABS module scan and brake-system inspection. Mike Shaw Subaru can also be reached at (720) 724-9280 or visited at 1650 W 104th Avenue, Thornton, CO 80234.