Please wait while the page loads...

2021 Subaru Crosstrek Check Engine Light

If the check engine light in your 2021 Subaru Crosstrek starts flashing, that means that the problem needs brisk attention and your Subaru should be brought in hastily. A flashing light indicates that the problem is important and if not taken care of hastily may result in primary break to the vehicle. This blinking light usually suggests a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can instantly increase the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A contentious, aged or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive specialists at Mike Shaw Subaru quickly by calling 7207249280. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a excessively expensive repair.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Mike Shaw Subaru to help indicate if your vehicle is persistent to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy appropriately. It could be anything from a bad sensor to plug wires needing to be interchanged.

Will the check engine light reset itself?

The check engine light on your 2021 Subaru Crosstrek will usually shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going persuasive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2021 Subaru Crosstrek light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Mike Shaw Subaru so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2021 Subaru Crosstrek?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous break to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow constantly means something less perilous but a flashing check engine light implies that your vehicle’s engine is in perilous trouble and service is imperative rapidly. If your check engine light is flashing in your 2021 Subaru Crosstrek, we highly hint not to drive the vehicle and schedule Subaru service today. Below is a list of the most modern reasons your check engine light can come on:

  • The battery is low or dead. The battery in your 2021 Subaru Crosstrek is every crucial. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The rate of a new one depends on the type of Subaru you drive, but check our ongoing service coupons and specials.
  • Your 2021 Subaru Crosstrek has a vacuum leak. Every Subaru Crosstrek has a vacuum system that performs a exceptional variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, hugely if they’re exposed to exciting heat or extreme cold.
  • One of the most normal and countless cause is that your 2021 Subaru Crosstrek gas cap is loose, damaged or missing. The gas cap for your 2021 Subaru Crosstrek serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on immediately after you put gas in your 2021 Subaru Crosstrek, earliest thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2021 Subaru Crosstrek’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Mike Shaw Subaru offers a complimentary multi-point inspection with every Subaru service. If you have an issue with your catalytic converter and don't get it repaired, your 2021 Subaru Crosstrek will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2021 Subaru Crosstrek's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the right collection of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Subaru Crosstrek is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Subaru Crosstrek is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your 2021 Subaru Crosstrek. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or classical, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more fancy repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2021 Subaru Crosstrek if it’s not installed perfectly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound simple, bring your Crosstrek to Subaru and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, hugely aftermarket parts and accessories, or using OEM parts earliest place might cost a microscopic bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2021 Subaru Crosstrek is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few various ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2021 Subaru Crosstrek. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of disparate things. It can be as straightforward as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2021 Subaru Crosstrek, contact Mike Shaw Subaru. Our Subaru service department can help you select what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Mike Shaw Subaru today!

Is it safe to drive your 2021 Subaru Crosstrek with the check engine light on?

If the check engine light is flashing, this means that there is a precarious issue and it is recommended to service your Subaru Crosstrek urgently. This question is not excessively plain because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more critical problem. Call the experts at Mike Shaw Subaru by dialing 7207249280 so you can describe the issues. Or reduce your speed and bring your 2021 Subaru to our certified mechanics as soon as proper.

Check Engine Light Service 2021 Subaru Crosstrek

What do you do when you’re driving along in your Subaru Crosstrek and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Subaru owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2021 Subaru Crosstrek checked as soon as viable. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2021 Subaru Crosstrek's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t consistent, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Subaru auto repair mechanics at Mike Shaw Subaru. There are also a number of relatively economical code readers that are designed for do-it-yourselfers, should you pick that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to determine the issue and repair it.

2021 Subaru Crosstrek Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that tiny light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your Crosstrek. There are hundreds of assorted codes that your check engine light can represent. While that sounds daunting, with a tiny patience, tackling paramount diagnostics will give you good knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, conspicuous and essential vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Ignition system faults
  • O2 Sensor
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Old Battery
  • Transmission issues
  • Bad Spark Plugs
  • Emissions controls issues

This is why it is crucial for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a hazardous concern, you risk damaging your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Subaru mechanic. Call Mike Shaw Subaru at 7207249280 today or schedule your check engine light service online today!

2021 Subaru Crosstrek Check Engine Light Flashing

Although there are countless attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various ordinary causes including something as easy as a loose gas cap. Contrasting ordinary reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Subaru Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Subaru issue was fixed.

Every 2021 Subaru Crosstrek was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the mechanical control team. If the mechanical control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is inaccurate nor what to do about it. That’s where we come in; Mike Shaw Subaru provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service licensed.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is continuously between $88 and $111. The prudent news, Mike Shaw Subaru offers complimentary multi-point inspections and free diagnostics, in most cases, to aid represent the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it prudent to get the applicable code reading and diagnosis.