2019 Subaru Legacy Tires in Thornton, CO | Mike Shaw Subaru

The manufacturer's published schedule calls for inspecting and rotating the wheels and tires every 6,000 miles. An inspection can identify uneven wear before the next scheduled interval. Follow the schedule while also responding to visible or noticeable changes.

• Check for uneven tread wear.
• Pay attention to highway-speed vibration.
• Book an inspection if wear changes suddenly.

The inspection compares wear at each corner and supports a rotation or replacement recommendation based on the tires’ condition. No tire pattern or pressure should be assumed without checking the vehicle and the tires fitted. The service addresses the core maintenance steps for this all-wheel-drive sedan.

• Four-tire tread-depth measurement.
• Manufacturer-specified rotation.
• Pressure adjustment and monitoring-system reset.

The correct pattern depends on the tire construction and fitment. Directional tread can limit where a tire moves, while staggered fitments can use different front and rear sizes. Mike Shaw Subaru can inspect the actual tires and apply the manufacturer-specified pattern rather than assuming one pattern applies to every setup.

• Drivetrain: all-wheel drive.
• Directional tread can change tire movement.
• Staggered fitments can change the rotation options.

A mismatched tread depth can load the all-wheel-drive driveline, which is why this answer differs from many two-wheel-drive vehicles. The condition and wear of the tires actually fitted determine whether one, two, or all four need attention. A tread measurement provides the basis for the recommendation.

• Compare tread depth across all four tires.
• Check for uneven or accelerated wear.
• Ask for an all-wheel-drive fitment assessment.

Vibration at highway speed is another reason to arrange an inspection, although its cause should be confirmed rather than assumed. Measuring all four tires shows whether wear is consistent and helps determine the next step. The tires’ condition, not a guessed figure, guides the recommendation.

• Look for uneven wear across the set.
• Check whether a wear indicator meets the tread.
• Use the penny test as a general check.

The appointment can include tread measurement on all four tires, rotation, pressure adjustment to the vehicle placard, and a tire pressure monitoring-system reset. The inspection supports a rotation or replacement recommendation based on what is found. Service specials may also be reviewed before booking.

• Use the online service scheduler.
• Call Mike Shaw Subaru at 720-724-9280.
• Ask about current service specials.