2017 Subaru BRZ Alignment: Specs & Service

These symptoms can indicate that one or more wheel angles are outside the manufacturer's specification. Mike Shaw Subaru in Thornton inspects the tires, steering, and suspension components before recommending an adjustment. A measurement can help distinguish an alignment concern from a worn component.

• The vehicle pulls on a flat road.
• The steering wheel is not centered while driving straight.
• Tread wears unevenly across a tire.

The inspection also covers tires, steering components, and suspension parts that could cause the alignment to move out of specification. Measuring the current angles first helps identify whether an adjustment is needed. This approach helps avoid paying for an adjustment when another worn part is the underlying concern.

• Camber, caster, and toe measurement on all four wheels.
• Adjustment toward the manufacturer's specification where possible.
• Inspection of tires, steering, and suspension components.

An inspection can identify wear or alignment-related concerns before they create uneven tire wear. Have the alignment checked after noticing a pull, an off-center steering wheel, or edge wear on a tire. It is also sensible to request a measurement after work that affects steering or suspension components.

• Inspect steering and suspension every 15,000 miles.
• Pay attention to changes in straight-line tracking.
• Check for uneven tread wear during routine tire care.

Mike Shaw Subaru checks the tires, steering, and suspension before recommending an adjustment. Parts that are worn can contribute to pulling, uneven tread wear, or a steering wheel that will not remain centered. The inspection helps identify whether an alignment is appropriate or whether another repair should be addressed first.

• Steering components are inspected for wear.
• Suspension components are checked for conditions affecting alignment.
• Tires are examined for wear that may indicate a problem.

A BRZ that tracks straight may not need an adjustment at every tire service. However, measuring the angles can reveal uneven settings before the steering symptom becomes obvious. Mike Shaw Subaru uses the measurement to show whether the current alignment needs adjustment rather than recommending work without checking it.

• Measure alignment after steering or suspension work.
• Look for one-edge tire wear.
• Compare current angles with the manufacturer's specification.

The service measures camber, caster, and toe on all four wheels and checks the related tires, steering, and suspension components. You can use the schedule appointment page to request service. For questions, contact Mike Shaw Subaru at 720-724-9280.

• Location: 1650 W 104th Avenue, Thornton, CO 80234.
• Service: four-wheel alignment measurement and adjustment where allowed.
• Phone: 720-724-9280.

Where the suspension allows adjustment, the angles are returned toward the manufacturer's specification. The purpose is to reduce the tire scrubbing that can occur when wheels are not aligned correctly. This can help address pulling, an off-center steering wheel, and uneven wear when alignment is the cause. Mike Shaw Subaru's service team can explain the measured condition and whether adjustment is needed before work is performed.

To request an inspection for your 2017 Subaru BRZ, schedule service online or call Mike Shaw Subaru at 720-724-9280.

Mike Shaw Subaru is located at 1650 W 104th Avenue in Thornton, CO. The alignment service compares current camber, caster, and toe measurements with the manufacturer's specification for the vehicle. If the suspension permits adjustment, the angles can be corrected toward that specification. This process gives you information about the vehicle's current condition before you decide whether an adjustment is necessary.

Schedule an appointment through the service scheduler or contact Mike Shaw Subaru directly at 720-724-9280.

The technician checks the tires, steering, and suspension components for wear that could affect the measurement or prevent the alignment from holding. Current angles are then compared with the factory specification, and adjustment is performed where the suspension allows. This process helps identify whether uneven tread wear or pulling is caused by alignment or by a component that needs attention.

Bring your 2017 Subaru BRZ to Mike Shaw Subaru in Thornton for a factory-spec alignment — schedule service.