2014 Subaru XV Crosstrek Tires in Thornton, CO

Regular inspection is especially useful for an all-wheel-drive vehicle because tread differences across the set matter. Driving conditions and tire wear can also affect when service is appropriate. A service visit can identify whether the tires need rotation or a different recommendation.

• Rotation follows the manufacturer-specified pattern for the vehicle.
• All four tires receive a tread-depth measurement.
• Uneven wear or vibration should prompt an inspection.

The inspection compares the condition of the complete tire set rather than focusing on one corner. After the measurements, the service recommendation is based on what the tires show. Booking can result in a rotation or a replacement recommendation when the inspection supports that decision.

• Tread depth is measured on every tire.
• Rotation accounts for the vehicle's all-wheel-drive system.
• Pressure and monitoring-system functions are addressed after rotation.

The manufacturer-specified pattern is followed during service, but the exact movement depends on the tire setup. Directional tread can limit where a tire may move, and staggered fitments can change the available positions. An inspection of the tires actually fitted determines the appropriate approach.

• All-wheel drive makes compatible tread depth across the set important.
• Directional tread can restrict movement between sides.
• Staggered fitments can affect which positions accept each tire.

A large difference in tread depth can load the driveline because the tires may effectively travel different distances in the same rotation. The correct recommendation depends on an inspection of tread condition and the tires fitted, along with the vehicle's service history. A technician can compare the set before replacement.

• All-wheel drive makes tread matching more significant than on some two-wheel-drive vehicles.
• Wear must be compared across all four corners.
• Replacement recommendations come from the inspection findings.

The penny test is another general check a driver may use, but an inspection provides a complete comparison of all four tires. Look for changes in tread wear across the set rather than judging one tire alone. For an all-wheel-drive vehicle, the condition and tread difference between tires also influence the recommendation.

• Check whether the tread-depth indicator has reached the tread surface.
• Watch for tread wearing unevenly across the set.
• Arrange an inspection if vibration appears at highway speed.

The appointment includes a four-tire tread measurement and a recommendation for rotation or replacement based on the inspection. Mike Shaw Subaru is at 1650 W 104th Avenue, Thornton, CO 80234. Drivers can also review available service specials before booking.

• Online scheduling is available through the service appointment page.
• The service team measures all four tires.
• Call 720-724-9280 for appointment assistance.